In 1901, William S. Harley, age 21, drew up plans for a small engine with a displacement of 7.07 cubic inches (116 cc) and four-inch (102 mm) flywheels. The engine was designed for use in a regular pedal-bicycle frame.
Over the next two years Harley and his childhood friend Arthur Davidson labored on their motor-bicycle using the northside machine shop at the home of their friend, Henry Melk. It was finished in 1903 with the help of Arthur's brother, Walter Davidson. Upon completion the boys found their power-cycle unable to conquer Milwaukee's modest hills without pedal assistance. Will Harley and the Davidsons quickly wrote off their first motor-bicycle as a valuable learning experiment.
Work immediately began on a new and improved second-generation machine. This first "real" Harley-Davidson motorcycle had a bigger engine of 24.74 cubic inches (405 cc) with 9.75 inches (25 cm) flywheels weighing 28 lb (13 kg). The machine's advanced loop-frame pattern was similar to the 1903 Milwaukee Merkel motorcycle (designed by Joseph Merkel, later of Flying Merkel fame.) The bigger engine and loop-frame design took it out of the motorized-bicycle category and would help define what a modern motorcycle should contain in the years to come. The boys also received help with their bigger engine from outboard motor pioneer Ole Evinrude, who was then building gas engines of his own design for automotive use on Milwaukee's Lake Street.
The prototype of the new loop-frame Harley-Davidson was assembled in a 10- by 15-foot (3 by 5 meter) shed in the Davidson family backyard. Most of the major parts, however, were made elsewhere, including some probably fabricated at the West Milwaukee railshops where oldest brother William A. Davidson was then toolroom foreman. This prototype machine was functional by 8 September 1904 when it competed in a Milwaukee motorcycle race held at State Fair Park. It was ridden by Edward Hildebrand and placed fourth. This is the first documented appearance of a Harley-Davidson motorcycle in the historical record.
In January 1905, small advertisements were placed in the "Automobile and Cycle Trade Journal" that offered bare Harley-Davidson engines to the do-it-yourself trade. By April, complete motorcycles were in production on a very limited basis. That year the first Harley-Davidson dealer, Carl H. Lang of Chicago, sold three bikes from the dozen or so built in the Davidson backyard shed. (Some years later the original shed was taken to the Juneau Avenue factory where it would stand for many decades as a tribute to the Motor Company's humble origins. Unfortunately, the first shed was accidentally destroyed by contractors in the early 1970s during a clean-up of the factory yard.)
In 1906, Harley and the Davidsons built their first factory on Chestnut Street (later Juneau Avenue). This location remains the Motor Company's corporate headquarters today. The first Juneau Avenue plant was a 40 by 60-foot (18 m) single-story wooden structure. That year around 50 motorcycles were produced.
1907 model.
Harley-Davidson 1000 cc HT 1916In 1907, William S. Harley graduated from the University of Wisconsin-Madison with a degree in mechanical engineering. That year additional factory expansion came with a second floor and later with facings and additions of Milwaukee pale yellow ("cream") brick. With the new facilities production increased to 150 motorcycles in 1907. The company was officially incorporated that September. They also began selling their motorcycles to police departments around this time, a market that has been important to them ever since.
Production in 1905 and 1906 were all single-cylinder models with 26.84 cubic inch (440 cc) engines. In February 1907 a prototype model with a 45-degree V-Twin engine was displayed at the Chicago Automobile Show. Although shown and advertised, very few V-Twin models were built between 1907 and 1910. These first V-Twins displaced 53.68 cubic inches (880 cc) and produced about 7 horsepower (5 kW). This gave about double the power of the first singles. Top speed was about 60 mph (97 km/h). Production jumped from 450 motorcycles in 1908 to 1,149 machines in 1909.
By 1911 some 150 makes of motorcycles had already been built in the United States – although just a handful would survive the 1910s.
In 1911, an improved V-Twin model was introduced. The new engine had mechanically operated intake valves, as opposed to the "automatic" intake valves used on earlier V-Twins that opened by engine vacuum. With a displacement of 49.48 cubic inches (810 cc), the 1911 V-Twin was smaller than earlier twins, but gave better performance. After 1913 the majority of bikes produced by Harley-Davidson would be V-Twin models.
By 1913, the yellow brick factory had been demolished and on the site a new 5-story structure of reinforced concrete and red brick had been built. Begun in 1910, the red brick factory with its many additions would take up two blocks along Juneau Avenue and around the corner on 38th Street. Despite the competition, Harley-Davidson was already pulling ahead of Indian and would dominate motorcycle racing after 1914. Production that year swelled to 16,284 machines.
Known in the US as "Observed Trials", it is not racing, but a sport nevertheless. Trials is a test of skill on a motorcycle whereby the rider attempts to traverse an observed section without placing a foot on the ground (and traditionally, although not always, without ceasing forward motion). The winner is the rider with the least penalty points.
Time and Observation
Time and observation trials are trials with a time limit. The person who completes the route the quickest sets the "standard time" and all other competitors must finish within a certain amount of time of the standard time to be counted as a finisher (they received penalty points for every minute after the quickest finisher). This is combined with the penalty points accrued from the observed sections to arrive at a winner, who is not alway the quickest rider or the rider who lost the less marks on observation but the rider who balanced these competing demands the best. One of the most famous time and observation trials is the "Scott" trial held annually in North Yorkshire.
A Road Racing World Championship Grand Prix was first organized by the Fédération Internationale de Motocyclisme (FIM) in 1949. The commercial rights are owned by Dorna Sports. Teams are represented by the International Road Racing Teams Association (IRTA) and manufacturers by the Motorcycle Sport Manufacturers Association (MSMA). Rules and changes to regulations are decided between the four entities, with Dorna casting a tie-breaking vote. In cases of technical modifications, the MSMA can unilaterally enact or veto changes by unanimous vote among its members. These 4 entities compose the Grand Prix Commission.
There have traditionally been several races at each event for various classes of motorcycles, based on engine size, and one class for sidecars. Classes for 50cc, 80cc, 125cc, 250cc, 350cc, and 500cc solo machines have existed over time, and 350cc and 500cc sidecars. Up through the 1950s and most of the 1960s, four-stroke engines dominated all classes. In the 1960s, two-stroke engines began to take root in the smaller classes. By the 1970s, two-strokes completely eclipsed the four-strokes. In 1979, Honda made an attempt to return the four-stroke to the top class with the NR500, but this project failed, and in 1983, even Honda was winning with a two-stroke 500. The 50cc class was replaced by an 80cc class, then the class was dropped entirely in the 1990s, after being dominated primarily by Spanish and Italian makes. The 350cc class vanished in the 1980s. Sidecars were dropped from World Championship events in the 1990s (see superside), reducing the field to 125s, 250s, and 500s.
MotoGP, the premier class of GP motorcycle racing, has changed dramatically in recent years. From the mid-1970s until 2002 the top class of GP racing allowed 500cc with a maximum of 4 cylinders, regardless of whether the engine was a two-stroke or four-stroke. Consequently, all machines were two-strokes, due to the greater power output for a given engine capacity. Some two- and three-cylinder two-stroke 500s were seen, but though they had a minimum-weight advantage under the rules, typically attained higher corner speed and could qualify well, they lacked the power of the four-cylinder machines. In 2002, rule changes were introduced to facilitate the phasing out of the two strokes, probably influenced by what was then seen as a lack of relevance: the last mass-produced 500cc 2-stroke model had not been available to the public for some 15 years.[original research?] The rules permitted manufacturers to choose between running two-strokes engines (500cc or less) or four-strokes (990cc or less). Manufacturers were also permitted to employ their choice of engine configuration. Despite the significantly increased costs involved in running the new four-stroke machinery, given their extra 490cc capacity advantage, the four-strokes were soon able to dominate their two-stroke rivals. As a result, by 2003 no two-stroke machines remained in the MotoGP field. The 125cc and 250cc classes still consist exclusively of two-stroke machines. In 2007, the MotoGP class had its maximum engine displacement capacity reduced to 800cc for a minimum of 5 years.
The 2008 racing calendar consisted of 18 rounds in 16 different countries (Spain which hosted 3 rounds, Qatar, Turkey, China, France, Italy, Great Britain, the Netherlands, Germany, Czech Republic, San Marino, Portugal, Japan, Australia and Malaysia). Exclusive to the MotoGP class, there was also a USA round at Mazda Raceway Laguna Seca in Monterey, California for the 800cc class only. In 2008 a MotoGP event was held at the Indianapolis Motor Speedway for the first time on a newly prepared track, and observers noted that the Speedway had hosted motorcycle racing before cars raced there. All three classes were scheduled to race but severe wind and rain prevented the 250cc class from racing. MotoGP racing at Indianapolis is counterclockwise, starting on the Formula One track, with additional turns directly after the pit area, bypassing the banking turn one of the oval track. Also because of the race being run counterclockwise on what is normally a clockwise track, the run off areas have seen significant modification.
The grid is composed of three columns (four for the 125cc and 250cc classes) and contains approximately 20 riders. Grid positions are decided in descending order of qualifying speed, the fastest on the 'pole' or first position. Races last approximately 45 minutes, each race a sprint from start to finish without pitting for fuel or tires.
In 2005, a flag-to-flag rule for MotoGP was introduced. Previously, if a race started dry and rain fell, riders or officials could red-flag (stop) the race and either restart or resume on 'wet' tires. Now, if rain falls a white flag is shown, indicating that riders can pit to swap the motorcycle on which they started the race for an identical one, as long as the tires are different (that is, intermediates instead of wets, or slicks instead of wets). Besides different tires, the wet-weather bikes have steel brake rotors and different brake pads instead of the carbon discs and pads used on the 'dry' bikes. This is because the carbon brakes need to be very hot to function properly, and the water cools them too much. Hence the conventional steel brakes. The suspension is also 'softened' up somewhat for the wet weather.
When a rider crashes, track marshals wave a yellow flag, prohibiting passing in that area; one corner back, a stationary yellow flag is shown and passing in this area of the track is prohibited; if a fallen rider cannot be evacuated safely from the track, the race is red-flagged. Motorcycle crashes are usually one of two types: lowsides and the more dangerous highsides, though increased use of traction control has made highsides much less frequent.
According to one estimate, leasing a top-level motorcycle for a rider costs about 3 to 3.5 million dollars for a racing season.
As a result of the 2008-2009 financial crisis, MotoGP is undergoing changes in an effort to cut costs. Among them are reducing Friday practice sessions; banning active suspension, launch control and carbon brakes; extending the lifespan of engines; reducing testing sessions.
